On this page
Quick answer
Make sure the machine isn’t running. Open the air filter cover, take out the old filter, place a new one onto the cover, and close it. The filter can’t be washed or reused, and it should stay in place at all times.
The AirSense 10 and AirSense 11 use a disposable air filter. It sits in the air filter cover and helps keep dust and water out of the machine. These steps follow ResMed’s U.S. user guides.
What you need
- A new ResMed air filter for your machine. Not sure which machine you have? See How to find your machine and mask model name.
- Your user guide, if you want a picture. The “About your device” page shows where the air filter cover is.
Standard or hypoallergenic filter?
Both user guides list 2 types of air filter for the machine: standard and hypoallergenic. Here is how the guides describe them.
| Filter type | What it’s made of (from the user guide) |
|---|---|
| Standard | Polyester non-woven fiber |
| Hypoallergenic | Blended synthetic fibers in a polypropylene carrier |
The guides give one set of steps for changing either type. Not sure which type you use? Check the label on your current filter pack, or ask your supplier.
How to change the filter
Warning from ResMed: Don’t change the air filter while the machine is running. If you also clean the machine, unplug it first. Make sure every part is dry before you plug it back in.
- Make sure the machine is not running.
- Open the air filter cover and remove the old air filter.
- Don’t clean the old filter to use again. The guides say it is not washable or reusable.
- Place a new air filter onto the air filter cover.
- Close the cover.
- Check that the filter and the cover are both in place. Both guides say to keep the filter fitted at all times, so water and dust stay out of the machine. The AirSense 11 guide says the same about the cover.
What not to do
- Don’t wash or reuse the filter. Both guides say it is not washable or reusable.
- Don’t use the machine without a filter. Both guides say to keep the filter fitted at all times.
- Don’t use non-ResMed filters. ResMed says to use only ResMed parts with the machine. The AirSense 11 guide names the air filter as one of them.
- Don’t open the machine. The guides say there are no parts inside that you can service yourself.
Check it worked
- The new filter is on the cover, and the cover is closed.
- The machine starts and runs the way it usually does.
On the AirSense 11, one cause of the message “System fault, refer to user guide, Error 4” is a blocked air filter. The guide says to check the filter and replace it if it’s blocked. Then unplug the power adapter and plug it back in to restart the machine.
When to call your supplier
Call the company that supplied your machine if:
- The machine is damaged, makes unusual sounds, or doesn’t work the way it usually does. ResMed’s guides say to stop using it and contact your care provider if this happens.
- An error message won’t clear after you try the troubleshooting steps in your user guide. Don’t try to open the machine.
- The air filter cover is cracked or broken. ResMed says to replace any part that shows cracks, tears or other visible wear.
- You’re not sure whether to use a standard or a hypoallergenic filter.
- You have questions about how many filters your insurance covers. Your supplier can tell you what your plan needs.
Common questions
When should I change the filter?
Both user guides say to replace the filter if it has holes or is blocked by dirt or dust. They also say to check it regularly, along with your water tub and air tubing. For how often each part is usually replaced, see How often should you replace CPAP supplies?
What does a worn filter look like?
ResMed’s U.S. replacement parts page says to look for discoloration, holes or tears. The user guides also say to replace a filter that is blocked by dirt or dust.
How do I know which filter to buy?
Match the filter to the type you use, standard or hypoallergenic. The AirSense 11 guide lists its own “Air11” filters. Check the label on your current filter pack, or ask your supplier, before you order.
Parts for this guide
Check the label on your current part, or your user guide, before you order.
-
Filters ResMed
ResMed AirSense 11 Standard Filters, 24-Pack
$46.99Member price $41.99 How membership works Add to cart -
Filters ResMed
ResMed AirSense 10 Standard Filters, 12-Pack
$46.99Member price $41.99 How membership works Add to cart -
Filters ResMed
ResMed AirSense 11 Hypoallergenic Filters, 12-Pack
$48.99Member price $43.99 How membership works Add to cart
Sources
- ResMed. AirSense 11 User Guide (Americas edition, 398291). https://document.resmed.com/documents/products/machine/airsense-11/user-guide/398291_airsense-11_user-guide_amer_multi.pdf
- ResMed. AirSense 10 User Guide (Americas edition, 3781122). https://document.resmed.com/documents/products/machine/airsense-series/user-guide/3781122_airsense-10_user-guide_amer_multi.pdf
- ResMed. CPAP supplies and replacement parts (U.S.). https://www.resmed.com/en-us/products/cpap/replacement-parts/






